DIY: How to Install a Stainless Steel Back Splash – Installing a stainless steel backsplash is a good way to add to your kitchen and complement any other stainless steel appliances such as refrigerators, ovens, and sinks. It will give your kitchen a beautiful look that is modern yet reasonably priced. This DIY guide will give you the basics of installing your own stainless steel backsplash. Remember that you may need to contact a professional if you are really unsure about what to do. If your carpentry skills are not up to par, consider enlisting a savvy friend or relative to give you some tips and help oversee your work. Be sure to round up all the materials you will need before you begin. This way, your time will be cut in half and the end result of your backsplash will be neat and professional. Here is a list of materials you will need to install a stainless steel backsplash.
- Soft cloth
- Stainless steel backsplash metal
- Measuring Tape
- Mastic adhesive
- Saw for backsplash material
- Board covered with carpet or a towel (nailed down)
- Impact Drill ( Click here for the cheapest impact driver deals)
To begin installing your new stainless steel backsplash, locate where you plan to install and mark the area. Also, mark the center of the installation area, and then mark a reference line above and below using the level.
Next, you will want to fit the stainless steel material to determine your measurements. Be sure to record these so you know exactly what to cut. Once you have the measurements ready, you will need to cut the material, if it has not already been done.
Use the straightedge and level to create a reference line from the center mark, all the way across. This should divide your area into a top and bottom half. Begin applying adhesive to the bottom half of your backsplash area, scraping it downwards. Be sure that the adhesive has been evenly applied.
Then you will want to install the stainless steel material, gently pressing it against the adhesive that is on the bottom half. Be sure that the entire piece fits properly! If it doesn’t, this is the time to quickly remove the stainless steel backsplash material and refit it. If it does fit properly, continue to apply adhesive to the top half of your workspace and press the rest of the stainless steel backsplash material to it.
As the stainless steel backsplash has been gently installed, the next step is to firmly set it in place. Put the cloth-covered board against the stainless steel backsplash and use the hammer to strike against it, setting the backsplash in place. You will need to allow the adhesive to dry for 24 hours. Once that is finished, use a soft cloth to gently buff at the stainless steel material and bring on the shine! You have now installed a new stainless steel backsplash for your kitchen.